AERIAL AND SCISSOR LIFT SAFETY COURSE OVERVIEW
Aerial lifts are used occasionally in many general industry jobs like cleaning, maintenance, inspection, stock picking, etc. But, if you make a living as a painter, HVAC tech, electrician, or any other job that requires you to be elevated to perform work in high places, then you likely spend a lot of time on aerial lifts.
Working at heights can be dangerous, and the majority of aerial lift accidents happen because of a lack of training or inattention. In this course, you will learn that operating aerial lifts safely begins with preventive maintenance, conditioning of machinery, and many other considerations before turning the key.
Upon successful completion of this course, you should have a better understanding of how to:
- Recognize different types and uses for aerial and scissor lifts
- Identify hazards of aerial and scissor lift use and operation
- Select inspection criteria for the vehicle, the lift, and the work surroundings prior to lift operation
- Identify safe work practice for operating aerial and scissor lifts
This course was designed to help satisfy requirements of the following regulations:
- 29 CFR 1910.67
- 29 CFR 1910.333
- 29 CFR 1910.502
- ANSI/SIA A92.2-2009
- ANSI/SIA A92.3-2006
- ANSI/SIA A92.5-2006
- ANSI/SIA A92.6-2006
AERIAL AND SCISSOR LIFT SAFETY COURSE TOPICS
- Types of aerial lifts
- Aerial lift hazards
- Safe work practices
AERIAL AND SCISSOR LIFT SAFETY COURSE DURATION: Approximately 20 minutes
AERIAL AND SCISSOR LIFT SAFETY COURSE ASSESSMENT: Testing conducted throughout this online course is designed to reinforce the information presented. A mark of 80% must be achieved in order to receive a certificate of completion. Participants are able to repeat the course twice if the pass mark is not achieved.
AERIAL AND SCISSOR LIFT SAFETY CERTIFICATE OF COMPLETION: Upon successful completion of this online course, a certificate of completion will be available for download and printing.
AERIAL AND SCISSOR LIFT SAFETY COURSE PREVIEW